Single-lamp 180W marine LED searchlight

The single-lamp 180W marine LED searchlight is built to be aimed, not just switched on. One lamp head, a customisable beam angle and unlimited rotation on both axes, controlled from a wired panel in the wheelhouse or a wireless remote anywhere on the vessel. It works on inland river vessels, ocean-going ships and harbour tugs, and carries a nominal life of up to 50,000 hours. Where LED replaces traditional lighting, energy use drops by up to 70%.

The beam angle is customisable, so the light can be set up for the working distance you actually need. Both axes rotate without end stops: the PAN sector turns continuously, and so does the TILT sector. The beam follows a target through a full sweep without having to reset. Aim it from the wired control panel inside the wheelhouse, or pick up the wireless remote and work it from the deck. If you need two heads on one mount instead of one, the dual-lamp series runs from 200W to 600W.

JNLED has manufactured LED lighting from Hong Kong since 2010. We hold our own moulds on key product lines and build with Philips Lumileds and Nichia LEDs with Mean Well drivers. Components are bought direct from the chip, driver and coating suppliers, which is what lets us adjust a product to a vessel rather than sell only what is in stock. Specification figures are published per product across the catalogue; for the marine searchlights, ask us to confirm the figures that apply to your build. Before you commit, we can produce a light-simulation report for the area you need to cover and a cost-saving calculation against the lighting you run now. After that, we handle project design, production, logistics including customs clearance and warehousing, worldwide shipping and installation support. Send the vessel type, the mounting position and the distance you need to reach, and we will come back with a specification.